Operation Manual

7
dPMR™ OPERATION
7-19
The Call Back function automatically sends back an
acknowledgement (Call Back) to the caller station
after receiving an Individual call�
L “Call Back” is displayed on the caller station’s
display�
L The called station saves a log in the Incoming list�
(Menu > Trunking > Call Back)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Trunking,”
then push [OK]�
Signaling/Call ►
Trunking ►
Menu
3� Push [Up] or [Down] to select “Call Back,” then
push [OK]�
Acquisition ►
Call Back ►
Trunking
4� Push [Up] or [Down] to select “ON,” then push
[OK] to turn ON the Call Back function�
✔ OFF
✔ ON
Site Select

Site Lock
ON

Trunk 1
Roam Req Call back
Call Back function (For the Trunking operation)
TIP: Push [Call Back] to turn the Call Back function
ON or OFF�
Previous view