Operation Manual

7
dPMR™ OPERATION
7-20
The transceiver can save a log of the received
Individual calls, Call Back calls, Status Messages, and
Messages in memory, depending on the presetting�
Up to 10 Message/Status or 5 Voice calls can be
saved in the log, and the oldest call record is deleted
when an 11th (Message/Status) or 6th (Voice) call
is received� However, once the transceiver is turned
OFF, the all records are deleted�
D Displaying the Incoming list
(Menu > Signaling/Call > Incoming)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Incoming,” then push [OK]�
Group Select ►
Incoming ►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select
“Voice” or “Message/Status,” then push [OK]�
Voice ►
Message/Status ►
Incoming
• Voice: The received Individual call
logs are saved�
• Message/Status: The received Status message
and Message logs are saved�
When “Voice” is selected in step 4:
The “Voice” screen is displayed�
Station 1
Station 3
Voice
L “ ” is for Individual calls�
TIP: Skip step 5 and go to step 6�
When “Message/Status” is selected in step 4:
The “Message/Status” screen is displayed�
Station 2 ►
Station 4 ►
Message/Status
L “ ” is for Status message or Message�
5� Push [P2 (Up)] or [P1 (Down)] to select the log,
then push [OK]�
• The message content is displayed�
Go to Area 2 after you
finish your task. I have
made about half of
Message Display
6� Hold down [Back] for 1 second to return to the
standby screen�
Incoming list
Previous view