Operation Manual

7
dPMR™ OPERATION
7-21
D Deleting the Incoming list
The receive call log can be deleted from the Incoming
list�
(Menu > Signaling/Call > Clear Incoming)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Clear
Incoming,” then push [OK]�
Call Menu ►
Clear Incoming ►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select “Voice” or
“Message/Status” to be deleted, then push [OK]�
Voice ►
Message/Status ►
Clear Incoming
• Voice: The received Individual calls
are in the log�
• Message/Status: The received Status
messages and Messages are
in the log�
5� After a dialog is displayed as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
screen and push [OK]�
R Are u Sure?
Cancel
OK
• The selected call log is deleted from the Incoming list�
6� Hold down [Back] for 1 second to return to the
standby screen�
Incoming list
Previous view