User Guide

9
2
OPERATION
r Push [PTT] to send the status message to the despatch-
er.
t When the status message has been successfully sent
out, ‘OK’ appears on the display.
DD
Include Call
•After moving to the communication channel, you can
make an additional call to the other station for them join
in to the communication with you.
➥Make a call with a memory individual/group call or make
a call via the keypad on the communication channel to
start the Include call.
DD
PTT Quick Call function
The Despatcher, Status message, Call Back memory
selected by function key or the currently selected memory
group (current group) can be called only by push [PTT].
■ Making a call via the keypad
Various calls can be made by the following keying sequences
via the keypad*.
*HM-100TN optional DTMF microphone is required.
**Turn the ‘DTMF Mic’ function in the ‘Common-Common’
menu of the cloning software to ‘Enable’ when using this
function. Please consult your dealer.
DD
Individual Call;
• Individual call to a station having the same prefix and
fleet codes.
Enter an individual code via the keypad and then push [#].
The individual call will be started.
(e.g.) To call 200 2001 300 from 200 2001 200, enter
‘300#’.
• Individual Call to a station having the same prefix code
and a different fleet code.
Enter the fleet code plus the individual code via the key-
pad and then push [#]. The individual call will be started.
(e.g.) To call 200 2006 300 from 200 2001 200, enter
2006300#.
• Individual Call to a station having a different prefix
code.
Enter the prefix code plus the fleet code plus the individual
code via the keypad and then push [#]. The individual call
will be started.
(e.g.) To call 211 2006 300 from 200 2001 200, enter
2112006300#.
NOTE: Instead of pushing [#], push [PTT] can be also make
the call.
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 14 (1,1)