Two-Way Radio User Manual

19
5
USER SETUP MENU
‘‘
User Setup Menu
By pushing and holding down the [Clear/P4] key for 2.5 sec-
onds when your transceiver is in the standby mode (not dur-
ing communication, dialling, or operation), the User Setup
menu appears.
The User Setup menu allows you to use the settings for the
backlight, Ringer level, beep level, compander ON/OFF,
microphone gain, squelch level, AF minimum level,
Scrambler, Hook and Horn settings.
q Push and hold the [Clear/P
4] key for 2.5 seconds to dis-
play the User’s Setup menu.
w Push and hold the [Clear/P
4
] key for another 2.5 seconds
will return to the waiting mode.
e Select the desired item by pushing [Clear/P
4
].
r An option within the item can be selected using [ ]/[ ].
*Pushing [Clear/P4] will return to the setting for ‘Back Light.’
ïï
Selectable items and setting value:
SELECTABLE ITEM []↔ []
• Back Light OFF, DIM, Auto and ON
• Ringer Level OFF, 1 to 5
• Beep Level OFF, 1 to 5
• Compander ON or OFF
• MIC Gain 1 to 5
*Following menu may not available as default settings.
Please consult your dealer for details.
• SQL Level 0 to 255**
• AF Min Level 0 to 255
• Scrambler OFF, 1 to 5
• Hook OFF, Clear, Answer or ON
• Horn OFF or ON
**Do not decrease lower than the default levels, otherwise
communication interruption may occur during the trunk-
ing operation.
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 24 (1,1)