User Guide

3 BIIS OPERATION

New2001

■ Auto emergency transmission

When [EMER (Silent)] is pushed, an emergency signal is au-

tomatically transmitted for the speciﬁed time period.

The status 22 (Emergency) is sent to the selected ID station,

and the position data is transmitted after the emergency sig-

nal when a GPS receiver is connected to the transceiver.

The emergency transmission is performed on the emergency

channel, however, when no emergency channel is speciﬁed,

the signal is transmitted on the previously selected channel.

There is no change in the function display or beep emission

during automatic emergency transmission.

■ Stun function

When the speciﬁed ID, set as a killer ID, is received, the stun

function is activated.

When the killer ID is received, the transceiver switches to the

passcode required condition. Entering of the passcode via the

keypad is necessary to operate the transceiver again in this

case.

■ BIIS indication

The following indications are available for the BIIS operation

on an MSK channel.

: Individual/group call is successful.

: Message (status or SDM) transmission is

successful.

: No answer back is received.

: Appears during retry of the call (2nd call).

: The call is cancelled for some reason.

: Called station is in busy.

■ Horn output

An automatic horn sounding function is available when the

optional OPC-617

ACC CABLE

is connected. When a status

message is received, the transceiver controls the vehicles

horn for the speciﬁed time period to inform you that a status

message is received.

This function is convenient when the operator away from the

transceiver or vehicle.

Ask your dealer or system operator for connection and set-

ting details.

IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 21 (1,1)