User Guide

28
5
CONNECTION AND INSTALLATION
New2001
D Mounting the transceiver
The universal mounting bracket supplied with your transceiver
allows overhead mounting.
• Mount the transceiver securely with the 4 supplied screws
to a thick surface which can support more than 1.5 kg.
IMPORTANT!
Detailed installation notes for Icom mobile transceivers to
be fitted into vehicles are available. Contact your Icom
dealer or distributor.
■ Optional unit installation
DD
UT-105/UT-117 installation
Install the optional unit UT-105 or UT-117, provides
SmarTrunk II™ or SmarTrunk 3G™ function, as below.
qTurn power off, then disconnect the DC power cable.
wUnscrew the 4 screws, then remove the bottom cover.
eInstall the unit as shown in the diagram below.
rAttach the bottom cover and screws to their original posi-
tion, then connect the DC power cable.
*This illustration
is described with
the UT-105.
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 28 (1,1)