User Guide

4
1
PANEL DESCRIPTION
New2001
Programmable function keys
The following functions can be assigned to [P0], [P1], [P2],
[P3], [P4], [
YY
], [
ZZ
], [ ] and [] programmable function
keys.
Consult your Icom Dealer or System operator for details con-
cerning your transceivers programming.
In the following explanations, programmable function names
are bracketed, the specific switch used to activate the func-
tion depends on programming.
[CH UP], [CH DN]
CH UP AND DOWN KEYS
• Select an operating channel.
• Select a transmit code channel after pushing the [TX
CODE CH] key.
• Select a DTMF channel after pushing the [DTMF] key.
Select a scan group while pushing and holding the
[Scan A/B] key.
[BANK] BANK KEY
Select and determine a bank number.
• When the optional UT-105 is installed, push [BANK] then
push [CH UP]/[CH DN] to select operating bank number,
and then push [BANK] to determine the bank number.
[PRIO A], [PRIO A (Rewrite)], [PRIO B]
PRIORITY CHANNEL KEYS
Select Priority A or Priority B channel with each push.
Push and hold [Prio A (Rewrite)] to program the pri-
ority channel.
[MR-CH1], [MR-CH2], [MR-CH3], [MR-CH4]
OPERATING CHANNEL KEYS
Select an operating channel directly.
[SCAN A], [SCAN B]
SCAN START/STOP KEYS
Push this key to start scanning; and push again to
stop.
NOTE: Place the microphone on hook to start
scanning.
Take the microphone off hook to stop scanning.
Push and hold this key to indicate the scan group,
then push to select the desired group.
[SCAN Add/Del(Tag)]
SCAN TAG KEY
Adds or deletes the selected channel to the scan
group.
[High/Low]
OUTPUT POWER SELECTION KEYS
Select the transmit output power temporarily or perma-
nently depending on the pre-setting.
Ask your Dealer or System Operator for the output power
level for each selection.
[TA] TALK AROUND KEY
Turns the talk around function ON and OFF.
• The talk around function equalises the transmit frequency
to the receive frequency for mobile-to-mobile communi-
cation.
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 4 (1,1)