User's Manual

OPTIONAL SmarTrunk II™ OPERATION

■ SmarTrunk II™ and

conventional modes

This transceiver is capable of SmarTrunk II™ functions.

The optional UT-105 allows communication in conventional

channels or SmarTrunk II™ channels. Select a channel bank

for SmarTrunk II™ before trunking operation.

• Push [BANK] one or more times to select a channel bank for

conventional channels or SmarTrunk II™ channels.

- Scanning starts when a channel bank for SmarTrunk II™ is select-

ed.

- Contact your Dealer for channel bank details.

NOTE: Connect an optional HM-100TN DTMF MICRO-

PHONE. Contact your Dealer for details.

■ SmarTrunk II™ operation

These features are enabled by a Dealer or System Operator

and may not be available in your system. Contact your Dealer

for details.

D Placing a telephone call

Enter the phone number followed by [1], [M].

• A high-pitched beep indicates that the number is accepted.

• When the called party answers, push the [PTT] switch to talk, and

release it to listen.

D Calling another local system subscriber

Enter the subscriber number followed by [3], [M].

• A high-pitched beep indicates that the number is accepted.

• You hear ringing, then two short beeps when the subscriber

answers.

• If the other subscriber is on another call or out of range, you hear a

fast busy signal and the call terminates automatically.

D Receiving a call

When you hear ringing, push [M] to answer.

• For a group call, you hear a short ring followed by two short beeps.

You do not have to answer a group call to hear it over the air.

00 IC-F610EUR.qxd 01.11.28 11:37 AM Page n (1,1)