User Manual

10
2
BASIC OPERATION
2
The following modes are available in the IC-F7000:
USB, LSB, AM, CW, FSK, AFSK, ALE-U, ALE-L and
EMAIL.
q Push [I/O] to enter the Quick set mode.
w Push [
√√
]/[
∫∫
] several times to select ‘MODE,’ then
push [
ΩΩ
CLR] or [OK
≈≈
] to select the desired
mode.
• The selected mode is indicated in the function display.
NOTE: The selected mode can be used for tempo-
rary operation only. Once changing the channel or
turning OFF the transceiver to return the original
operating mode
NOTE: If you want to change the operating mode
on the channel permanently, refer to channel pro-
gramming. (pgs. 31, 32)
[I/O] [Ω CLR]/[OK ≈]
[∫]/[√]
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------ç-USB----å
--BEEP-LV---5
Q-SET-MODE
--LCD-CONT--ç-7-å
è-RF-GAIN---9
--DIMMER----6>0
--TX-PWR----HI
■ Mode selection
While pushing and holding [
ΩΩ
CLR], turn power ON
to turn the Simple mode operation ON.
•“-” appears upper-right corner on the display.
• Repeat above procedure to turn the Simple mode opera-
tion OFF.
NOTE: While in simple operating mode, Quick set
mode, Initial set mode, Frequency indication are re-
stricted.
[I/O] [Ω CLR]
Simple mode indication
-
■ Simple mode operation