Operation Manual

6
15
SPECIFICATIONS AND OPTIONS
■ Specifications
Specifications are measured in accordance with EN 300 086.
DD
IC-FR3100
General
• Frequency coverage : 150.000–174.000 MHz
• Channel spacing : 12.5/25.0 kHz (Narrow/Wide)
12.5/20.0 kHz (Narrow/Middle)
• PLL channel step : 5.0, 6.25 kHz
• Frequency stability : ±1.0 kHz
• Number of channels : Max. 32 channel
• Antenna connector : Type-N × 2 (50 Ω)
• Operating temp. range : –25°C to +55°C
• Power supply voltage : 220–240 V AC (50/60 Hz)
13.2 V DC (negative ground)
• Current drain (at 13.2 V) : TX high (25 W) 10.0 A
Max. audio 2.0 A
Stand-by 1.0 A
• Dimensions : 410(W) ×110(H) × 360(D) mm
(Projections not included)
•Weight (approx.) : 12 kg
Transmitter
• RF output power : 25 W
• Modulation system : Variable reactance frequency
modulation system
• Max. frequency deviation : ±5.0 kHz (Wide),
±4.0 kHz (Middle),
±2.5 kHz (Narrow)
• Spurious emissions : Less than 0.25 µW
• Adjacent channel power : More than 70 dB
(Wide, Middle),
More than 60 dB (Narrow)
•
Intermodulation attenuation : More than 40 dB
• Audio harmonic distortion : 3.0% typical
(at 1 kHz, 40% deviation)
• Microphone impedance : 600 Ω (8-pin modular)
Receiver
• Receive system : Double conversion
superheterodyne system
• Sensitivity (20 dB SINAD) : 0 dBµV (EMF) typical
• Intermediate frequencies : 1st; 31.65 MHz, 2nd; 455 kHz
•
Adjacent channel selectivity : More than 70 dB
(Wide, Middle),
More than 60 dB (Narrow)
• Spurious response : More than 70 dB
• Intermodulation : More than 70 dB
• Audio output power : 2.5 W typical at 10% distortion
with a 4 Ω load
•
External speaker connector : 2-conductor 3.5 (d) mm (
1
⁄8") 4 Ω
DD
IC-FR4100
General
• Frequency coverage : 400.000–430.000 MHz
(Depends on version) 450.000–480.000 MHz
• Channel spacing : 12.5/25.0 kHz (Narrow/Wide)
12.5/20.0 kHz (Narrow/Middle)
• PLL channel step : 5.0, 6.25 kHz
•Frequency stability : ±1.0 kHz
• Number of channels : Max. 32 channel
• Antenna connector : Type-N × 2 (50 Ω)
• Operating temp. range : –25°C to +55°C
• Power supply voltage : 220–240 V AC (50/60 Hz)
13.2 V DC (negative ground)
• Current drain (at 13.2 V) : TX high (25 W) 12.0 A
Max. audio 2.0 A
Stand-by 1.0 A
• Dimensions : 410(W) ×110(H) × 360(D) mm
(Projections not included)
•Weight (approx.) : 12 kg
All stated specifications are subject to change without notice or obligation.