User Manual

New2001
3
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
i CHANNEL 16/CALL CHANNEL KEY [16/C]
 Push to select Channel 16. (p. 11)
 Hold down for 1 second to select the Call channel. (p. 11 )
• “CALL” is displayed when the Call channel is selected.
 When the Call channel is selected, hold down for 3 sec-
onds to enter Call channel entry mode. (p. 16 )
o SOFTKEYS
Desired functions as described below can be assigned in
the Menu screen.
Distress Call [
] (For only USA version transceivers.)
Push to enter “DISTRESS CALL” in the DSC menu to se-
lect the nature of the call, and then to make a call.
DSC [
] (For only USA version transceivers.)
Push to enter the DSC menu to compose a DSC call.
Scan [
] (p. 20)
Push to start or stop a Normal or Priority scan.
Dualwatch/Tri-watch [
] (p. 21)
 Push to start Dualwatch or Tri-watch.
 Push to stop Dualwatch or Tri-watch when either is ac-
tivated.
High/Low [
] (p. 14)
Push to set the power to high or low.
• Some channels are set to only low power.
Channel/Weather channel [ ]* (pp. 11, 13)
Push to selects and toggles the regular channel and
Weather channel.
*For only USA and Australian version transceivers.
Channel [ ]* (p. 11)
Push to select a regular channel.
* For only IC-M423 and IC-M423G except for Australian version
transceivers.
Public address [ ] (p. 72)
Push to enter the PA (Public Address) mode.
RX Speaker [
] (p. 72)
Push to turn the RX Speaker mode ON or OFF.
Horn [
] (p. 73)
Push to enter the Horn mode.
Intercom [
] (p. 71)
Push to enter the Intercom mode.
LO/DX [
]* (p. 14)
Push to turn the Attenuator function ON or OFF.
• “LOCAL” is displayed when the Attenuator function is ON.
*For only USA and Australian version transceivers.
AquaQuake [ ] (p. 18)
Holding down to activate the AquaQuake to clear water
away from the speaker grill.