User Manual

5
2
PANEL DESCRIPTION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
 Function display
!9
!5
!7
!8
!6
qw ietr!0you
!2
!3
!4
!1
q BUSY/TRANSMIT ICON (p. 14)
 “
” is displayed when receiving a signal or when
the squelch is open.
 “
” is displayed while transmitting.
w POWER ICON (p. 14)
 “25W” is displayed when high power is selected.
 “1W” is displayed when low power is selected.
e RX SPEAKER ICON (p. 72)
Displayed while in the RX Speaker mode.
r CHANNEL GROUP ICON (p. 12)
 Shows which channel group is selected, INT, USA,
CAN, ATIS or DSC, depending on the version.
 “WX” is displayed when the weather channel is select-
ed.*
*For only USA and Australian version transceivers.
t CALL CHANNEL ICON (p. 11)
Displayed when the Call channel is selected.
y DUPLEX ICON (p. 12)
Displayed when a duplex channel is selected.
u FAVORITE CHANNEL ICON (p. 20)
Displayed when a Favorite (Tag) channel is selected.
i MESSAGE ICON (p. 63)
Blinks when there is an unread DSC message.
o GPS ICON
 Stays ON when the built-in GPS receiver* or an exter-
nal GPS receiver is receiving valid position data.
*For only IC-M423G and IC-M424G.
 Blinks when searching for valid position data.
!0 SWITCH ICON (p. 66)
Displayed when the “CH 16 SWITCH” in DSC Settings is
set to OFF.