User Manual

35
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
e Select one of three options, then push [ENT].
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
• Able to Comply: Make an acknowledgment call without
any changes.
• Unable to Comply: You cannot make a communication.
The Acknowledgement call (‘Unable to
Comply’) can be automatically trans-
mitted, if set. See page 65 for details.
• Propose New Channel: You can make an acknowledgement
call, but you specify the intership chan-
nel. Select a desired intership channel,
using Dial, or [Y]/[Z], then push [ENT].
r The Individual ACK confirmation screen is displayed.
Push [CALL] to make an acknowledgement call.
t The screens shown below are displayed.
y Reply to the call using the microphone.
u Push [EXIT] to return to the normal operating mode.*
* Only USA version, the exit confirmation dialog (p. 29) is displayed.
• Only USA version, push [RESEND] to resend the acknowledgement.
Displayed
for only USA
version.