User Manual

62
7
DSC OPERATION
 Receiving DSC calls (Continued)
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
 The alarm sounds for 2 minutes.
 “RCVD TEST ACK” is displayed. The backlight blinks for
2 minutes.
q Push [ALARM OFF] to stop the alarm and the blinking
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
w Push a softkey to select your desired action.
[EXIT]
 Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• “ ” continues to blink and the Call is stored in the Received
Call Log.
 Transmitted Call log
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
q Enter “TX CALL LOG” in the DSC CALLS menu.
MENU  DSC Calls  Transmitted Call Log
(Push [MENU].) (Rotate Dial, then push [ENT].)
w Push [Y]/[Z] to select the desired item, then push [ENT].
• Push [BACK] to return to the previous screen.
• Push [EXIT] to return to the normal operating mode.
e Rotate Dial to scroll the DSC message contents.
Rotate
r To delete the displayed DSC message, push [DEL].
• The confirmation screen is displayed, then push [OK] to delete.
t Push [EXIT] to return to the normal operating mode.