User Manual

DSC OPERATION

r After making the individual DSC call, the transponder will

display “DSC Transmission COMPLETED.”

• Push [CLEAR] to return to the screen displayed before you en-

tered the voice channel selection screen in step w.

• The transceiver stands by on Channel 70 until an acknowledge-

ment is received.

Step 2: Transceiver’s operation

t When the acknowledgement is received, alarm sounds.

 If the acknowledgement ‘Able to comply’ is received,

push [ALARM OFF] to stop the alarm, and then select

the intership channel speciﬁed in step w.

• A different intership channel will be selected if the station you

called cannot use the channel.

• To reply, push [PTT] and speak at your normal voice level.

• You can check the MMSI code or the name, if entered, of the

AIS target on the display.

 If the acknowledgement ‘Unable to comply’ is received,

push [ALARM OFF] to stop the alarm, and then “INDI-

VIDUAL CALL FAILED” is displayed.

After the communication is ﬁnished, push [EXIT] to return

to the normal operating mode.

Transponder’s display Transceiver’s display

[DSC]

[CLEAR]

[Z]

[Y]

TRANSPONDER

‘Able to comply’ is received

‘Unable to comply’ is received

 Making an Individual call using an AIS transponder (Continued)