User Manual

22
7
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
A Distress call should include the ship’s position and time.
If no GPS is connected, your position and UTC (Universal
Time Coordinated) time should be manually input. They are
automatically included when a GPS receiver compatible with
the NMEA 0183 (ver. 2.0 or later) or NMEA 2000* format is
connected.
*Some versions of IC-M506 do not have a NMEA 2000 connector.
•ManualprogrammingisdisabledwhenaGPSreceiveris
connected.
•Manuallyprogrammedpositionandtimewillbeheldfor
only 23.5 hours.
q Enter “POSITION INPUT” in the DSC SETTINGS menu.
Edit your latitude and longitude position using dial, or [ w Y]/
[Z]/[Ω]/[≈].
 •Selectadesirednumberusing[Y]/[Z]/[Ω]/[≈].
 •Push[ENT]ordialtosetit.
 •Tomovethecursor,rotatedialorselecteitherarrow,“←” or “→,”
then push [ENT] or dial.
 •SelectN(Northlatitude)orS(Southlatitude)whenthecursoris
on the ‘N’ or ‘S’ position.
 •SelectW(Westlongitude)orE(Eastlongitude)whenthecursor
is on the ‘W’ or ‘E’ position.
After entering the position, push [ENT] to program it. e
The UTC time programming screen is displayed, enter the r
UTC time in the following way:
 •Selectadesirednumberusing[Y]/[Z]/[Ω]/[≈].
 •Push[ENT]ordialtosetit.
 •Tomovethecursor,rotatedialorselecteitherarrow,“←” or “→,”
then push [ENT] or dial.
Push [ENT] or dial to program your position and time. t
 •Returntothe“DSCSETTINGS”screen.
Position and time programming ■
MENU ➪ DSC SET ➪ Position Input
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)