User Manual

DSC OPERATION

Receiving a Position Request Call D

When a Position Request Call is received:

➥ The alarm sounds for 2 minutes.

➥ “RCVD POS REQUEST” appears. The LCD backlight

blinks for 2 minutes.

q Push [ALARM OFF] to stop the alarm and the blinking

backlight.

 •Evenifyoudonotpush[ALARMOFF],thealarmstopsafter2

minutes, and then the screen in step w is displayed.

w Push a softkey to select your desired action.

[IGN]

➥Push to ignore the Call and return to the normal operat-

ing mode.

  •ThetransceiverexitstheDSCmode.

  •The“ ” icon continues to blink and the Call is stored in the

Received Call Log.

[INFO]

➥Push to display the Received call information. (p. 65)

[ACK]

➥ Push to display the “POSITION REPLY” screen and

send a reply to the Call. (p. 47)

When “POSITION ACK” is set to “Auto TX,” the transceiver

automatically replies to the Call. In that case, both the TX

and RX calls are stored in the Transmitted and Received

Call Logs.