User Manual

13
4
BASIC OPERATION
New2001
Call channel programming ■
You can program the Call channel with your most often-used
channel in each channel group for quick recall.
Select the desired channel group (INT, USA or CAN) to be q
programmed. (p. 10)
w Push [MENU].
e Rotate dial or push [Ω]/[≈] to select the “RADIO SET” icon
and then push the softkey below the icon.
 •RADIOSETTINGSmenuisdisplayed.
r Rotate dial or push [∫]/[√] to select “CALL CHAN,” and
then push [ENT].
t Rotate dial or push [∫](CH)/[√](CH) to select a channel.
y Push [ENT] to program the displayed channel as the Call
channel.
 •Push[CLEAR]tocancel.
Channel name programming ■
Each channel can be assigned a unique alphanumeric ID of
up to 10 characters.
Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + , – .
/[\]^_:;<=>?)andaspacecanbeinput.
Push [ q ∫](CH) or [√](CH) to select a channel.
 •First,canceltheDualwatch,Tri-watchor Scan function, if acti-
vated.
Push [NAME] to open the channel name programming w
screen.
 •Ablackcursorisdisplayedontherstcharacter.
Enter the desired channel name in the following manner: e
 •Selectadesiredcharacterusing[∫]/[√]/[Ω]/[≈].
 •Push[ENT]ordialtosetit.
 •Tomovethecursor,rotatedialorselecteitherarrow,“←” or “→,”
then push [ENT] or dial.
 •Select“SPACE,”thenpush[ENT]toinputaspace.
 •Select“DELETE,”thenpush[ENT]todeleteacharacter.
 •Push[CLEAR]tocancelandreturntothepreviousscreen.