Operation Manual

15
6
DSC PREPARATION
6
■ Position and time programming
q While pushing and holding [MODE SET ] push
[POWER] to enter initial set mode.
• Turn the power OFF in advance.
w Rotate [GRP] to select the “GPS DISPLAY” then
rotate [CH] to select the desired position indication
type from simple and detail.
e Rotate [GRP] to select the “OFFSET TIME” then
rotate [CH] to set the time difference between local
and the UTC times within –12 to +12 hours in
10 minute steps.
r Turn the power OFF once, then ON again to exit
quick set mode.
✔ When a position and the UTC time data
(NMEA0183 ver. 3.01 format) is applied to [GPS],
the following steps are not necessary.
t Push [DSC] to select DSC watch mode.
y Push [MODE SET ] to enter the DSC menu.
• DSC menu is displayed as below.
u Rotate [CH] to select “Position,” then push
[ENT].
i Enter your position and the UTC time via the key-
pad, then push [ENT].
• Push [3
SCAN ] for the ‘East,’ [9] for the ‘West,’ [6
RF
- G ]
for the ‘North’ and [7] for the ‘South’ setting.
• Rotate [CH] to move the cursor.
o Push [ENT] to program the position and time.
• Return to the “DSC MENU” indication as in step u.
!0 Push [MODE SET ] to exit the DSC menu.
•Rotate [CH] to select “Exit” then push [ENT] also
exits set mode.
•“MNL” appears instead of “GPS.”
******* Position *******
---
Position & time ----
Latitude
Longitude
UTC
34 34.343N
135
34.343E
12:34
OKNull
******* DSC MENU *******
--------
Select --------
Position
Individual
Group
Position
REQ
Distress
Distress
RLY
Ç
OKSEL
*** SET MODE ***
ITEM SEL
*** SET MODE ***
SIMPLE
DETAIL
ÇÇ
ITEM SEL
[POWER][MODE SET]
When no position and the UTC (Universal Time Coordi-
nated)
time data in NMEA0183 ver. 3.01 format, such
as from a GPS receiver, etc., is applied to [GPS] con-
nector, your position and the UTC time should be input
for DSC operation.
IMPORTANT!
Manually programmed position and time data will be
held for 23.5 hours only, and “?” symbol is displayed
for all digits instead of the programmed data after 4
hours from programming.
They are never renewed during the voyage when
the position is set manually.
F1B
GPS
12.345.0
Exit
SP
34 34.000N
135
34.000E
12:34
F1B
GPS
12.345.0
Exit
SP
Lat
34 34'N
Lon135
34'E
12:34
• Simple position indication • Detail position indication
MMSI 123456789
MMSI
123456789
IC-M801E_0.qxd 05.12.2 16:32 Page 15