Operation Manual

44
11
SET MODE
2001 NEW 2001 NEW
DD
Initial set mode items (continued)
Scan speed
This item adjusts the scan speed (rate at which chan-
nels are searched). The scan speed can be set from 1
to 10 with “1” being the fastest and “10” being the
slowest. (default: 4)
*** SET MODE ***
ITEM SEL
Display type
The upper half of the display can be set to display a
programmable channel name or a receive frequency
according to your needs. (default: CH-NAME)
*** SET MODE ***
CH-FREQUENCY
CH-NAME
ÇÇ
ITEM SEL
J2B filter
Select the IF filter passband width for J2B mode op-
eration from wide, mid and narrow.
• WIDE : 2.4 kHz
• MIDDLE : 1.0 kHz
• NARROW : 500 Hz (default)
*** SET MODE ***
WIDE
MIDDLE
NARROW
ÇÇ
ITEM SEL
F1B filter
Select the IF filter passband width for F1B mode op-
eration from normal and narrow.
• WIDE : 1.0 kHz
• NARROW : 500 Hz (default)
*** SET MODE ***
WIDE
NARROW
ÇÇ
ITEM SEL
FSK shift frequency
Several shift frequencies are used for FSK operation.
This item selects an FSK shift frequency for almost
any FSK system from 850 Hz, 425 Hz, 200 Hz and
170 Hz. (default: 170Hz)
*** SET MODE ***
170Hz
200Hz
425Hz
850Hz
ÇÇ
ITEM SEL
FSK tone frequency
Several mark frequencies are used for FSK operation.
This item selects an FSK mark frequency for almost
any FSK system from 1200 Hz, 1275 Hz, 1487.5 Hz,
1615 Hz, 2100 Hz and 2125 Hz. (default: 1615Hz)
*** SET MODE ***
1275Hz
1487.5Hz
1615Hz
2100Hz
ÇÇ
ITEM SEL
IC-M801E_0.qxd 05.12.2 16:32 Page 44