User Guide
34
8
WHEN RECEIVING A CALL
2001 NEW 2001 NEW
■ Semi/Auto (telephone) call
q When receiving a telephone call, beeps sound and
the transceiver selects the communication fre-
quency automatically.
•Speak into the handset or microphone as the normal
way.
•The transceiver answers to the call to unable to reply
the call automatically, according to the setting. See right
column for details.
w When the communication is finished, push
[FREQ/CH].
•The transceiver sends and receipts the DSC call for
disconnecting the communication.
e After the disconnection, the communicated time is
displayed as below.
DD
Answering condition selection
In the default setting, the transceiver connects to the
telephone call automatically, that described at left.
However, when the operator is in busy or leaving from
the transceiver, the operator cannot be reply the call
immediately. The answering condition setting is con-
venient for such cases.
q During DSC watch mode, push [MODE
SET
] to se-
lect the DSC menu.
w Rotate [CH] to select “Semi/Auto,” then push
[ENT].
e Rotate [CH] to select “Answer Setting,”
then push [ENT].
r Rotate [CH] to select “Able” or “Unable” as
desired.
• Able : The transceiver selects the commu-
nication frequency specified by the
coast station, then connect to the
phone call. (default)
• Unable : The transceiver answering to the
phone call to unable to reply the call.
t Push [ENT] to return to the DSC menu screen.
******
Semi/Auto
*******
----
Answer
Setting
----
Able
Unable
Ç
OKSEL
******
Semi/Auto
*******
--------
Action
--------
Calling
Answer
Setting
Ç
OKSEL
*******
DSC
MENU
*******
--------
Select
--------
Position
Individual
Group
Geographical
Distress
Distress
RLY
Distress
RLY
ACK
Semi/Auto
Test
RX
memory
TX
memory
Set
up
Selt
test
Exit
Ç
OKSEL
RX
F1B
GPS
<
Duration
>
00:12:34
Semi/Auto
Lat
34
34'N
Lon135
34'E
12:34
Exit
RX
J3E
GPS
<
Calling
>
Semi/Auto
END
Lat
34
34'N
Lon135
34'E
12:34
Exit
RX
F1B
GPS
Semi/Auto
END
ACK
Lat
34
34'N
Lon135
34'E
12:34
Exit
<
Wait
for
ACK
>
RX
J3E
GPS
<
Connect
>
Semi/Auto
Lat
34
34'N
Lon135
34'E
12:34
Exit
IC-M801E_0.qxd 05.12.2 16:32 Page 34