User Guide

SET MODE

2001 NEW

■ Quick set mode

Entering quick set mode

q Push [F] then [MODE

SET

] to enter quick set mode.

• Select voice or e-mail operation mode in advance.

w Rotate [GRP] to select the desired item.

e Rotate [CH] to set the values or conditions for the

selected item.

r Push any key to exit quick set mode.

[MODE SET]

[CH][GRP]

[F]

Noise blanker level

This item adjusts the noise blanker level to protect a

signal from various pulse-type noises from 1 to 10.

(default: 5)

The set level is effective when the noise blanker is ac-

tivated.

ITEM SEL

Quick set mode items

Squelch level

This item adjusts the squelch threshold level from 1

to 100. (default: 30)

When the squelch is activated, signals stronger than

this set level only are received.

ITEM SEL

Dimmer

This item sets the LCD backlight brightness for dim-

mer selection from 0 (dark) to 10 (bright).

By pushing [F] then [0

DIM

], the set brightness is se-

lected to provide easy visibility during night time op-

eration, etc. (default: 6)

ITEM SEL

LCD contrast

This item sets the LCD contrast from 1 to 10.

(default: 7)

ITEM SEL

IC-M801E_0.qxd 05.12.2 16:32 Page 42