User Guide

2001 NEW
45
11
SET MODE
11
DD
Initial set mode items (continued)
FSK polarity
Normal and reverse polarities are available for FSK
operations. This item allows you to select one of
these polarities.
• NORMAL : Key open=space; Key close=mark
(default)
• REVERSE : Key open=mark; Key close=space
*** SET MODE ***
NORMAL
REVERSE
ÇÇ
ITEM SEL
CW break-in function
The CW break-in function (in A1A mode) toggles
transmit and receive with CW keying. Full break-in al-
lows you to receive signals between transmitted key-
ing pulses during CW transmission. Semi break-in al-
lows you to mute receiving until keying stops with
some delay time. (default: FULL)
*** SET MODE ***
OFF
DELAY
FULL
ÇÇ
ITEM SEL
Microphone keys
This item activates/deactivates the keys on the op-
tional HM-135 HAND MICROPHONE
([P], [
∫] and [√]).
Refer below on how to program the [P] key.
(default: OFF)
*** SET MODE ***
OFF
ON
ÇÇ
ITEM SEL
[P] key function
This item assigns a function to the [P] key on the op-
tional HM-135 HAND MICROPHONE to activate it the
same as if making the key operation for [TUNE THRU ],
[MODE SET ], [F]+[1 NB ], [F]+[2 SQL ], [F]+[3 SCAN ],
[F]+[4 SP
×
] or [F]+[5 AGC
×
]. (default: MODE)
*** SET MODE ***
TUNE
MODE
NB
SQL
ÇÇ
ITEM SEL
Voice squelch
This item turns the voice squelch function ON and
OFF when operating in J3E and H3E modes.
When the function is set to OFF, the squelch acts as
an S-meter squelch for J3E and H3E modes.
(default: ON)
*** SET MODE ***
OFF
ON
ÇÇ
ITEM SEL
REMOTE ID
This item selects the ID for the transceiver from 1 to
99. (default: 11)
*** SET MODE ***
ITEM SEL
IC-M801E_0.qxd 05.12.2 16:32 Page 45