User Guide

46
11
SET MODE
2001 NEW
DD
Initial set mode items (continued)
Modulation input/output selection
This item selects the input/output terminal for signals
to/from an external unit, such as a TNC (Terminal
Node Controller).
(default: AF/MOD)
***
SET
MODE
***
AF/MOD
ACC
MIC
ÇÇ
ITEM SEL
ACC out
This item toggles signal output from [AF/MOD] (pins
68; KEY, 13.6 V and ALC signals) ON and OFF.
OFF : No signal is output from pins 68 of
[AF/MOD]. (default)
ON : KEY, 13.6 V and ALC signals are output
from pins 68, respectively.
***
SET
MODE
***
OFF
ON
ÇÇ
ITEM SEL
Position indication type
Select the position indicating type from simple and de-
tail.
SIMPLE : Hides second digits (default)
DETAIL : Shows second digits
***
SET
MODE
***
SIMPLE
DETAIL
ÇÇ
ITEM SEL
Offset time
Set the offset time between the UTC and local time
within 12:00 to +12:00 in 10 minutes steps.
(default: 0:00)
***
SET
MODE
***
ITEM SEL
Automatic print out
This item turns the automatic print out function ON
and OFF when receiving a DSC call.
OFF : Prints out the received DSC contents
manually.
ON : Prints out the received DSC contents
automatically. (default)
***
SET
MODE
***
OFF
ON
ÇÇ
ITEM SEL
REMOTE connector interface
This item selects the interface format for [REMOTE]
connector. (default: NMEA)
***
SET
MODE
***
NMEA
RS-232C
ÇÇ
ITEM SEL
IC-M801E_0.qxd 05.12.2 16:32 Page 46