Operation Manual

BATTERY CHARGING

New2001

 Connecting BC-226 together

You can connect up to 6 BC-226 together.

1. Remove the charger’s right cover. (q)

2. Snap the DC power plug to the other charger’s DC

power jack. (w)

WARNING: DO NOT connect more than 6 chargers

together. It may result in an electric shock, cause a re,

overheating, or damage chargers.

D Information

 Status indicator

Light color Status

Orange Charging

Green Charging is completed.

Blinks orange and green Charging failed. It may have some

problems.

 BC-226 Fuse replacement

If a fuse blows, nd and repair the cause of the problem.

Then replace the damaged fuse with a new, adequately

rated fuse.

Fuse type: 5 A/58 V (low prole mini blade fuse)

NOTE:

• The transceiver MUST be turned OFF while charging.

Otherwise:

- The battery will not be charged correctly.

- The battery life may be shortened.

• Do not transmit while charging. When you need to

transmit, remove the transceiver from the charger, and

then turn ON the power.

• If the battery pack does not properly charge when it is

attached to the transceiver, remove it from the transceiver

and insert only the battery pack into the charger.

NOTE: Remove the fuse using the needle-nose pliers.

Fuse