User Manual

10
4
PREPARATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
The Automatic Transmitter Identification System (ATIS) ID
consists of 10 digits. You can enter the ID in the “ATIS ID
Input” item on the Menu screen.
■ Entering the ATIS ID (For Dutch and German versions)
This ID entering can be done only once. After entering,
it can be changed only by your dealer or distributor.
If your ATIS ID has already been entered, this entry is
not necessary.
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼] to select “ATIS ID Input,” and then push
[ENT] to start entering.
• The “ATIS ID Input” screen is displayed.
3. Enter your ATIS ID.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] to enter the selected
number.
• Select “←” or “→,” to move the
cursor.
4. Repeat step 3 to enter all 10 digits.
5. Push the software key below [DONE] to set the entered
ID.
• The “Conrmation” screen is displayed.
6. Enter your ATIS ID again to
confirm.
7. Push the software key below
[DONE] to set the entered ID.
L When your ATIS ID is successfully
entered, the screen displays “ATIS
ID Successfully Registered,” and
then the operating screen opens.
L You can check the ATIS ID in
“Information” on the Menu screen.