User Manual
Table Of Contents
- Front cover
- IMPORTANT
- FEATURES
- EXPLICIT DEFINITIONS
- IN CASE OF EMERGENCY
- PRECAUTIONS
- RECOMMENDATION
- INFORMATION
- DISPOSAL
- COUNTRY CODE LIST
- TABLE OF CONTENTS
- 1. OPERATING RULES
- 2. SUPPLIED ACCESSORIES AND ATTACHMENTS
- 3. PANEL DESCRIPTION
- 4. PREPARATIONS
- 5. BASIC OPERATIONS
- 6. SCAN
- 7. DUALWATCH/TRI-WATCH
- 8. DSC OPERATION
- 9. OTHER FUNCTIONS
- 10. MENU SCREEN
- 11. BATTERY CHARGING
- 12. OPTIONAL SPEAKER MICROPHONE
- 13. TROUBLESHOOTING
- 14. SPECIFICATIONS AND OPTIONS
- 15. CHANNEL LIST
- 16. SAFETY TRAINING INFORMATION
- INDEX
- Back cover
19
New2001
DSC OPERATION
8
■ DSC address ID
D Entering an Individual ID
You can enter a total of 75 Individual IDs, and assign names
of up to 10 characters.
1. Display the “Individual ID” screen.
[MENU] ► “DSC Settings” ► “Individual ID”
• “No ID” is displayed if no ID is entered.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] to enter the selected number.
• Select “←” or “→,” to move the cursor.
TIP:
• Select [! $ ?] to use characters, and select [ABC] to use
numbers and letters.
• Select characters or space using [▲]/[▼]/[◄]/[►].
• Push [ENT] to enter the selected character.
• Select “←” or “→,” to move the cursor.
2. Push the software key below
[ADD].
• The Individual ID’s entry screen is
displayed.
3. Enter the Individual ID.
4. Push the software key below [NEXT] to start entering
the name.
NOTE: the rst digit is xed as “0” for a Group ID.
The rst two digits are xed as “0” for any Coast
station ID.
5. After entering, push the software
key below [DONE] to save, and
return to the previous screen.
• The entered name is displayed.