User Manual

21
8
DSC OPERATION
New2001
■ Entering the position and time
A Distress call should include the vessel’s position and time.
If no GPS data is received, manually enter the position and
Universal Time Coordinated (UTC) time.
[MENU] ► “DSC Settings” ► “Position Input”
NOTE:
• The manual entry is disabled while the GPS data is
received.
• The manually entered position and time is valid only for 4
hours, or until turning OFF the transceiver.
1. Display the “Position Input” screen.
2. Enter the latitude and longitude.
TIP:
• Select a number or a compass
direction using [▲]/[▼]/[◄]/[►].
• Push [ENT] to enter the selected
number.
• Select “←” or “→,” to move the
cursor.
• Push the software key below
[NEXT] to change the entry
between latitude, longitude, and
UTC.
3. Push the software key below
[NEXT] to start entering the UTC
time.
L Use the TIP in step 2 to enter.
4. Push the software key below
[DONE] to set the entered
position and time.
• Returns to the previous screen.
L The entered position and time are
displayed on the operating screen.
L “Manual” is displayed next to the
time display.