America Inc. Two-Way Radio User Manual

q w e r
■ Memory channel programming
Set the desired frequency and other functions in VFO mode. Push
[MR S.MW]
for 1 sec. to
enter the select memory write condition.
• 1 short and 1 long beeps sound. Rotate
[R-DIAL]
to select the de-
sired memory channel number.
Push
[MR S.MW]
for 1 sec.
again to program the contents into the selected channel.
• 3 beeps sound.
q w e
■ Scan skip setting
Push
[MR S.MW]
to select
memory mode.
Rotate
[R-DIAL]
to select the de-
sired memory channel.
While pushing
[5 SKIP]
, rotate
[R-DIAL]
to set the skip setting
(skip channel or skip frequen- cy) ON and OFF.
q w
■ VFO scans
Push
[VFO MHz]
to select VFO
mode.
While pushing
[MODE SCAN]
,
rotate
[R-DIAL]
to select the de-
sired scan type.
• Selectable from “ALL,” “BAND” or
“PROG xx” (xx= 0–24).
e r
Release
[MODE SCAN]
to start
scan.
• Rotate
[R-DIAL]
to change the scan-
ning direction.
• During scan, push
[MR S.MW]
to
start auto memory write scan.
Push
[DUALWATCH]
to stop
scan.
q w
■ Memory scans
Push
[MR S.MW]
to select
memory mode.
• Push
[BAND]
to select a bank, if de-
sired.
While pushing
[MODE SCAN]
,
rotate
[R-DIAL]
to select the de-
sired scan type.
• Selectable from “ALL,” “BANK-LINK”
or “BANK.”
e r
Release
[MODE SCAN]
to start
memory/bank scan.
• Rotate
[R-DIAL]
to change the scan-
ning direction.
Push
[DUALWATCH]
to stop
scan.
SCAN:ALL
√
SCAN:BAND
√
SCAN:PROG-01
√
SCAN:ALL
SCAN:BANK-LINK
SCAN:BANK