America Inc. Two-Way Radio User Manual

21
4
BASIC OPERATION
■ AFC function
The AFC (Automatic Frequency Control) function tunes the
displayed frequency automatically when an off-center fre-
quency is received. It activates in FM/WFM modes only with
single band operation.
➥
Push [0 AFC] to toggle the AFC function ON and OFF.
• “AFC” appears when the AFC function is in use.
NOTE: The AFC function is not available during dualwatch
operation.
■ NB/ANL function
The NB (noise blanker) function removes pulse-type noise
when USB, LSB or CW mode is selected. The ANL (Auto-
matic Noise Limitter) function reduces noise components
when AM mode is selected.
See page 22 for setting details.
NOTE: No display indication appears during dualwatch op-
eration, but both functions are active while in specific
modes.
√
MODE
ANL
AFCTSQL
AM
51 100
PSKIP
-DUP
√
MODE
NB
AFCTSQL
USB
145 100
PSKIP
-DUP
“NB” appears while the
NB function is in use.
“ANL” appears while the
ANL function is in use.
ATT
√
MODE
ANL
AFC
TSQL
FM
1260 000
PSKIP
-DUP
DIAL.SEL SWEEP CENTER
T-SCAN SKIP M.N
TONE SET TS
ATT RF GAIN
IC Recorder
123
4560
789
BAND
DUALWATCH MAIN/SUB POWER
VFO
MHz
MODE
SCAN
MR
S.MW
SCOPE
LOCK
REC
AFC
“AFC” appears while the
AFC function is in use.
0
AFC
“ ” “ ”
or
an off-frequency is received.
appears when