America Inc. Two-Way Radio User Manual

27
6
MEMORY CHANNELS
■ Memory bank setting
The IC-R20 has a total of 26 banks (A to Z). Regular memory
channels, 000 to 999, are assigned into the desired bank for
easy memory management.
qPush [MR S.MW] for 1 sec. to select the select memory
write condition.
•1 short and 1 long beep sound.
•“
µµ
” indicator blinks.
wRotate [R-DIAL] to select the desired memory channel.
eWhile pushing [8 SET], rotate [R-DIAL] to select “BANK.”
•“BANK” item can also be selected by pushing [8 SET] several
times.
• Bank group and channel number is displayed if the selected mem-
ory channel has already been previously assigned into a bank.
rWhile pushing [BAND], rotate [R-DIAL] to select the de-
sired bank group from “A” to “Z.”
• The bank group can also be selected by pushing [BAND] sev-
eral times.
tAfter releasing [BAND], rotate [R-DIAL] to select the bank
channel number from “00” to “99.”
•Vacant bank channel numbers will only be displayed.
yPush [MR S.MW] for 1 sec. to set the channel into the
bank.
• Return to the previous indication.
-BNAME:
FM
>BANK-:A-00
012
µ
.
146 . 010
Bank channel is selected with [R-DIAL]
-BNAME:
FM
>BANK-:A-00
012
µ
.
146 . 010
Bank group is selected with
BAND
FM
>CLEAR
-SKIP-:OFF
-MNAME:
-BNAME:
-BANK-:----
012
µ
.
146 . 010
FM
>BANK-:----
012
µ
.
146 . 010
is pushedAfter
[R-DIAL]
SET
8
SET
8
MR
S.MW
BAND
SET TS:5.0kHz
√
MODE
ANL
AFCTSQL
FM
146010
PSKIP
-DUP