America Inc. Two-Way Radio User Manual

COMFORTABLE RECEIVING

■ Tone scan

By monitoring a signal that is being operated with pocket

beep, tone or DTCS squelch function, you can determine the

tone frequency or DTCS code necessary to open a squelch.

qSet the frequency to be checked for a tone frequency or

code.

wTurn the desired tone type, tone squelch or DTCS, ON by

holding [7 TONE] with turning [R-DIAL].

• One of “TSQL” or “DTCS” appears.

• Even when the pocket beep function is activated, the function is

cancelled when starts the tone scan.

ePush [4 T-SCAN] for 1 sec. to start the tone scan.

•To change the scanning direction, rotate [R-DIAL].

r When the CTCSS tone frequency or 3-digit DTCS code is

matched, the squelch opens and the tone frequency or

code is temporarily programmed into the selected condi-

tion, such as memory channel.

• The tone scan pauses when a CTCSS tone frequency or 3-digit

DTCS code is detected.

✔

For your convenient!

Even if no tone type is selected, either tone squelch or DTCS,

pushing [4 T-SCAN] for 1 sec. will also start tone scan. In this

case, the tone scan searching for tone squelch frequency

only.

☞ NOTE: The decoded tone frequency or code is pro-

grammed temporarily when a memory channel is se-

lected. However, this will be cleared when the memory

channel is re-selected.

√

188 0

√

013

DTCS scan

Tone squelch scan

[R-DIAL]

T-SCAN

TONE