America Inc. Two-Way Radio User Manual

67
11
OTHER FUNCTIONS
■ Partial reset
If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing
the memory contents, a partial resetting function is available
for the receiver.
➥ While pushing [VFO MHz], turn the power ON to partially
reset the receiver.
■ All reset
The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting for a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See left for details.
IMPORTANT!:
Resetting the receiver (All reset) CLEARS all memory in-
formation and initializes all values in the receiver, includ-
ing TV channel skip setting.
➥ While pushing [VFO MHz] and [MR S.MW], turn the power
ON to reset the CPU.
DIAL.SEL SWEEP CENTER
T-SCAN SKIP M.N
TONE SET TS
ATT RF GAIN
IC Recorder
123
4560
789
BAND
DUALWATCH MAIN/SUB POWER
VFO
MHz
MODE
SCAN
MR
S.MW
SCOPE
LOCK
REC
AFC
√
MODE
ANL
AFCTSQL
FM
146 010
PSKIP
-DUP
ALL-RESET
*The appearing frqeuency is
different according to the
receiver version.
VFO
MHz
MR
S.MW
POWER
AT POWER ON
DIAL.SEL SWEEP CENTER
T-SCAN SKIP M.N
TONE SET TS
ATT RF GAIN
IC Recorder
123
4560
789
BAND
DUALWATCH MAIN/SUB POWER
VFO
MHz
MODE
SCAN
MR
S.MW
SCOPE
LOCK
REC
AFC
√
MODE
ANL
AFCTSQL
FM
146 010
PSKIP
-DUP
*The appearing frqeuency is
different according to re-
ceiver version.
VFO
MHz
POWER
AT POWER ON