User Guide

32
10
OTHER FUNCTIONS
ASSIGNABLE FUNCTIONS
NULL
Backlight (LIGHT)
Power output ([H/L])
Scan start/stop ([SC])
DTMF memory*
1
(DTMF)
DTMF re-dial (RE-DIAL)
Lock function ([
D L])
Beep tones (BEEP)
VFO/memory ([
A V])
Tone setting ([
C T])
Tone scan (T SCAN)
Tuning step (TS)
Squelch level ([SQL])
WX channels*
2
(WX)
ANI code*
3
(ANI CODE)
Duplex setting ([DUP])
Memory write ([
B M])
Call channel (CALL)
Shift (SHIFT)
DISPLAY READOUT DESCRIPTION
No function.
Toggles display backlighting on/off.
Toggles high and low power output.
Starts and stops the scan function.
Selects a DTMF memory.
Redials the last-used DTMF code.
Toggles the lock function on/off.
Toggles confirmation beep tones on/off.
Toggles between VFO and memory modes.
Toggles tone squelch operation on/off.
Starts/stops tone scan.
Selects a tuning step for frequency selection.
Selects a squelch level.
Selects a weather channel.
Selects an ANI code.
Selects +duplex, –duplex or simplex operation.
Writes the selected frequency into a memory.
Selects the call channel.
Shifts the CPU’s clock frequency.
*
1
The DTMF memory function can only be assigned to [SQL], [SC], [DUP] or [H/L]. *
2
Weather channels are only available in the USA version.
*
3
ANI code setting only appears when ANI operation is selected through cloning (p. 36).
IC-T2H_RTTE.qxd 03.6.20 18:58 Page 32 (1,1)