User Guide
37
13
TROUBLESHOOTING
If your transceiver seems to be malfunctioning, please check
the following points before sending it to a service center.
PROBLEM
No power comes on.
Transmitting is impossible.
Frequency cannot be set.
Scan does not function.
[Y] or [Z] keys do not
function when using the
optional HM-75A.
Squelch does not open for
received signals.
Some memory channels
cannot be selected.
ANI mode cannot be ac-
cessed.
Some functions are not
available.
POSSIBLE CAUSE
• The battery is exhausted.
(A slight current flows in the circuits even when the
power is off.)
• The battery is exhausted.
• Memory mode, call channel or channel indication
mode is selected.
• The lock function is activated.
• The same frequencies are programmed into both
scan edges.
• Only CH1 is programmed; or, all other memory
channels are set as skip channels.
• Memory channels 1 and/or 2 are not pro-
grammed and simple mode is selected.
• Tone squelch is activated.
• Some memories have been cleared or the num-
ber of active memories has been reduced.
• ANI mode can only be accessed through cloning.
• The desired function(s) has not been assigned to
a key.
SOLUTION
• Charge the battery pack or place new dry cell bat-
teries in the battery case.
(Remove the battery pack if you will not be using the trans-
ceiver for a long time.)
• Charge the batteries or place new dry cells in the
battery case.
• Push [
A V] to select VFO mode; or, turn power on
while pushing [Y] + [0] to exit channel indication.
• Set [D L] down to deactivate the lock function.
• Program different frequencies.
• Program additional memories; or, cancel skip set-
tings for one or more channels.
• Program the memory channels or set to microphone
normal.
• Turn off the tone squelch.
• Program the cleared memories or increase the num-
ber of active memory channels.
• Set ANI operation using the CS-T2
CLONING SOFT
-
WARE
.
• Set the desired function(s) using Key Customize
mode.
REF.
pgs. 9,
10
pgs. 9,
10
pgs. 11
p. 13
p. 19
p. 25
pgs.
19, 28
p. 26
pgs.
19, 30
p. 36
p. 31
IC-T2H_RTTE.qxd 03.6.20 18:58 Page 37 (1,1)