Instruction Manual

48
11
OTHER FUNCTIONS
DD
Transmission permission
Turns transmission permission ON and OFF.
This function can be set for each memory and
call channel, independently.
• tX .ON: Transmission is permitted. (default)
• tX .OF: Transmission is inhibited.
DD
Pager/Code squelch channel
Programs 3-digit ID code in channel “C0”
and individual or group call code in channel
“C1” to “C6” for the pager and code squelch
functions. See p. 41 for programming details.
*This item appears only when the optional UT-108 is installed and pager
or code squelch function is activated.
Optional UT-108 required
MR
F
TX
MR
F
TX
47
11
OTHER FUNCTIONS
DD
Tuning step
Selects tuning step from 5, 10, 12.5, 15, 20,
25 , 30 and 50 kHz.
DD
Scan pause timer
Selects the scan pause time from SCt.5,
SCt.10, SCt.15 and SCP. 2. When receiving
signals, the scan pauses according to the
scan pause time.
• SCt. 5/10/15 : Scan pauses for 5/10/15 sec.
(default: SCt.15)
• SCP. 2 : Scan pauses until signal dis-
appears. Resumes after 2 sec. from signal disap-
pearing.
DD
Function key timer
Selects [A•
FUNC ] effect timer from F0.At,
F1.At, F2.At, F3.At and F .m.
• F0.At : “ ” disappears immediately after
(default) secondary function is operated.
• F1/2/3.At : “ ” disappears after 1/2/3 sec.
from secondary function is oper-
ated.
• F .m : “ ” appears until [A•
FUNC ] is pushed again.
DD
LCD backlight
Selects LCD backlight lighting condition from
auto, ON and OFF.
• LIG.At : Lights when any keys except
[PTT] is pushed. (default)
• LIG.ON : Lights continuously during the transceiver powered
ON.
• LIG.OF : Never lights.
F
F
F
MR
F
TX
MR
F
TX
MR
F
TX
MR
F
TX
MR
F
TX
MR
F
TX