Instruction Manual
54
11
OTHER FUNCTIONS
‘‘
CPU reset
The function display may occasionally display erroneous informa-
tion (e.g. when first applying power). This may be caused by exter-
nally by static electricity or other factors.
If this problem occurs, turn power OFF. After waiting a few seconds,
turn power ON again. If the problem persists, perform CPU reset-
ting operation as following procedure.
• Turn power on while [SQL] and [D•
CLR
] are
pushed.
CAUTION:
Resetting the CPU returns to all programmed
contents to their default settings.
AT
POWER ON
53
11
OTHER FUNCTIONS
DD
Mic simple mode
This item turns the microphone simple mode
ON and OFF. Microphone simple mode is
used to change the function assignments for
keys in the optional HM-75A
REMOTE
-
CONTROL
SPEAKER
-
MICROPHONE
as below. This assign-
ment is convenient for 3-channel use of sim-
ple operation.
• mIC.N1 : Normal 1 (default)
• mIC.N2 : Normal 2
• mIC.Sm : Simple mode
NOTE:
Turn power OFF when connecting the HM-75A to the trans-
ceiver.
VFO mode cannot be selected via the microphone when SIM-
PLE mode is selected.
Optional HM-75A required
MR
F
TX
MR
F
TX
HM-75A
Mode NORMAL1 NORMAL2 SIMPLE
key
[A]
Freq. [B•
CALL
]
[SQL] [SQL]
CH Null
[B]
Freq. VFO/Memory VFO/Memory
[B•
CALL
]
CH Null Null
[∫]
Freq. Freq. Up Freq. Up
MR-00CH
CH Memory CH Up Memory CH Up
[√]
Freq. Freq. Down Freq. Down
MR-01CH
CH Memory CH Down Memory CH Down