Instruction Manual

Access to secondary function
Select the call channel. (p. 19)
Selects a memory mode. (p. 19)
Selects VFO mode, aborts direct frequency input,
or cancels scanning, etc. (pgs. 16, 31)
Input digit “1” during frequency input, memory chan-
nel selection, etc. (pgs. 16, 19)
Input digit “2” during frequency input, memory chan-
nel selection, etc. (pgs. 16, 19)
Input digit “3” during frequency input, memory chan-
nel selection, etc. (pgs. 16, 19)
Input digit “4” during frequency input, memory chan-
nel selection, etc. (pgs. 16, 19)
Input digit “5” during frequency input, memory chan-
nel selection, etc. (pgs. 16, 19)
Input digit “6” during frequency input, memory chan-
nel selection, etc. (pgs. 16, 19)
KEY
FUNCTION SECONDARY FUNCTION (After [A• FUNC ] is pushed)
[name]
[A•
FUNC ]
[B•
CALL ]
[C•
MR ]
[D•
CLR ]
[1•
TONE ]
[2•
P . BEEP ]
[3•
T . SCAN ]
[4•
DUP ]
[5•
SCAN ]
[6•
SKIP ]
4
1
3
1
PANEL DESCRIPTION
PANEL DESCRIPTION
D Key pad
No function.
No function.
Entering into memory programming/editing mode. (p. 25)
Programs/transfers VFO/memory or call channel contents into
memory channel/VFO when pushed for 1 sec. (pgs. 25, 26)
No function.
Selects a subaudible tone function. (pgs. 21, 35)
Turn the pocket beep function ON and OFF. (p. 37)
Starts the tone scanning. (pgs. 23, 38)
Selects a duplex function (–duplex, +duplex, simplex). (p. 21)
Starts scanning. (p. 31)
Sets and cancels skip setting for memory skip scan during mem-
ory mode. (p. 32)