User Guide

26
6
MEMORY/CALL OPERATION
■ Programming the memory/call
channels
q Push [D• CLR ] to select VFO mode, if
necessary.
w Set the desired frequency.
e Set other information, such as tone,
duplex, as desired.
r Push [A• FUNC ], then [C• MR ] momentar-
ily.
•“
X
” and memory channel number
blink.
t Push [Y ] or [Z] to select the desired
memory channel.
• When programming the call channel,
select “C.”
• When [VOL] is assigned as tuning dial,
rotate [VOL] to select the memory
channel. (pgs. 17, 53)
y Push [A• FUNC ], then push [C• MR ] for 1 sec. (until 3 beeps are
emitted) to program the information into the selected memory
channel and return to VFO
• Continue to hold [C• MR ] down for 1 sec. after 3 beeps are emitted,
to increment the displayed memory channel number.
[C•MR]
[D•
CLR]
[Z]
[Y]
[A•
FUNC]
IC-V8_New.qxd 03.2.6 10:20 Page 26 (1,1)