User Manual

18
4
BASIC OPERATION
D Tuning step selection
The IC-V8 has 8 tuning steps— 5, 10,
12.5, 15, 20, 25, 30 and 50 kHz. The tun-
ing step is selectable in
SET MODE .
q Push [A•
FUNC ] then [8• SET ] to enter
SET MODE .
w Push [Y]/[Z] several times to select
the tuning step item.
e Rotate [VOL] to select the desired tun-
ing step.
r Push [#•
ENT ] to exit SET MODE .
■ Setting audio/squelch level
D To set the audio level
Rotate [VOL] to set the desired audio
level while receiving a signal.
• When no signal is received, push and
hold [SQL] while setting the audio level.
• When [VOL] is assigned as tuning dial,
push [Y]/[Z] to adjust the audio output
level. (pgs. 17, 53)
D To set the squelch level
While pushing [SQL], push [Y]/[Z] to
set the squelch level.
• The squelch level “1” is loose squelch,
“10” is tight squelch.
• When [VOL] is assigned as tuning dial,
rotate [VOL] while [SQL] is pushed.
(pgs. 17, 53)
[Y]
[Z]
[VOL]
[SQL]
MR
F
TX
[Y]
[Z]
[#•ENT ]
[VOL]
[A•FUNC]
[8•SET]
IC-V8_New.qxd 03.2.6 10:20 Page 18 (1,1)