User Manual

13
3 SETTING A FREQUENCY
■ Using the keypad
The frequency can be directly set via numeral keys on the mi-
crophone.
z Push [VFO/LOCK] to VFO mode, if necessary.
x Push [
ENT C] to activate the keypad for digit input.
c Push 6 keys to input a frequency.
• When a digit is mistakenly input, push [ ENT C] to clear
the input, then repeat input from the 1st digit.
• Pushing [ CLR A] clears input digits and retrieves the
frequency.
■ Using the [Y]/[Z] keys
➥ Push [Y] or [Z] to select the desired frequency.
• Pushing [Y] or [Z] for more than 0.5 sec. activates a
scan. If scan starts, push [Y] or [Z] again to cancel it.
YZ
Push
Push
Push
Push
[EXAMPLE]: Setting frequency to 145.3625 MHz.
ENT
C