User Manual
■ Subaudible tones
(Encoder function)
D Subaudible tones
q Select the mode/channel you wish to set the subaudible
tones to, such as VFO mode or memory/call channel.
w Push [SET(LOCK)] until “” and “rt” appears; or until “”
and “Ct” appears for tone squelch or pocket beep use.
• Push [MONI(ANM)] to reverse the order of selection.
• Cancel the DTMF memory encoder function in advance, if nec-
essary. (p. 00)
e Rotate the tuning dial to select and set the desired sub-
audible frequency.
r Push [V/MHz(SCAN)] to exit set mode.
☞NOTE: The subaudible tone encoder frequency can be set
in a memory channel temporarily. However, the set con-
tents are cleared once the memory/call mode is selected.
To store the tone frequency permanently, overwrite the
channel information.
z Set the mode/channel you wish to set the sub-
audible tone encoder frequency to, such as
VFO mode or memory/call channel.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
x Push [
SET
B] until “” and “rt” appears; or until
“” and “Ct” appears for tone squelch or pocket
beep use.
• Pushing [
ENT
C] reverses the order of selection.
• Cancel the DTMF memory encoder function in ad-
vance, if necessary. (p. 00)
c Push [Y] or [Z] to select and set the desired
subaudible tone frequency.
• Push and hold [Y]/[Z] to change the above tones
continuously.
v Push [
CLR
A] to exit set mode.
• Subaudible tone frequency list
(unit: Hz)
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
SET
B
USING
SET MODE
20
5
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
The display shows that an
88.5 Hz subaudible CTCSS
tone frequency is set.