User Manual

32
6
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Memory bank selection
q Push [M/CALL(PRIO)] to
select memory mode, if de-
sired.
w Push [BANK(OPT)] to se-
lect memory bank selecting
condition.
• Bank initial blinks
e Rotate the tuning dial to se-
lect the desired bank.
• Initials which no contents are
progemmed banks are
skipped.
r Push [BANK(OPT)] to set
the bank.
• Stop blinking.
t Rotate the tuing dial to se-
lect the contents in the
bank.
• No channel numbers are dis-
layed for memory bank opera-
tion.
y To return to regular memory
condition, push [BANK(OPT)]
twice.
z Push [MR/CALL] to select memory mode,
if desired.
➥ Push [MR/CALL] for 1 sec. to select the
call channel.
x Push [BANK/OPTION] to select memory
bank selecting condition.
• Bank initial blinks
c Push [Y]/[Z] to select the desired bank.
• Initials which no contents are programmed
banks are skipped.
v Push [BANK/OPTION] to set the bank.
• Stop blinking.
b Push [Y]/[Z] to select the desired contents
in the bank.
• No channel numbers are displayed for memory
bank operation.
n To return to regular memory condition,
push [BANK/OPTION] twice.
BANK/OPTION
[Y]/[Z]
Push [BANK(OPT)] to select
memory bank mode.
Shows bank initial.