User Manual

33
6 MEMORY OPERATION
■ Memory bank setting
q Push [MR/CALL] to select memory mode, then select the
desired memory channel via the tuning dial.
w Push [BANK(OPT)].
•“M” and “– –” indication blink as follow.
e Push [BANK(OPT)] again to set the channel to bank set-
ting stand-by condition.
•“M” and “– –” indication blinking stop.
r Push [MW(S.MW)] then rotate the tuning dial to select the
desired bank to be set.
• Bank initial blinks as follow.
t Push [MW(S.MW)] again to set the channel into the bank.
• Bank initial blinking stops.
y Push [BANK(OPT)] twice to return to regular memory con-
dition.
u Repeat steps q to y to set an another memory channel
into the same or another bank.
z Push [MR/CALL] then select the desired
memory channel via [Y]/[Z] or keypad.
x Push [BANK/OPTION].
•“– –” indication blinks.
c Push [BANK/OPTION] again to set the
channel to bank setting stand-by condition.
•“– –” indication blinking stops.
v Push [FUNC] then [ CLR A(MW)] then push
[Y]/[Z] to select the desired bank to be
set.
• Bank initial blinks.
b Push [ CLR A(MW)] to set the channel into
the bank.
• Bank initial blinking stops.
n Push [BANK/OPTION] twice to return to
regular memory channel condition.
m Repeat steps z to n to set an another
memory channel into the same or another
bank.
BANK/OPTION
MW
[Y]/[Z]
Blinks
S.MW
MW
Blinks
OPT
BANK