User Manual

4
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
yS/RF INDICATORS
➥ Show the relative signal strength while receiving sig-
nals. (p. 00)
➥ Show the output power level while transmitting. (p. 00)
uSKIP INDICATOR (p. 00)
Appears when the displayed memory channel is specified
as a skip channel.
iMEMORY INDICATOR (p. 00)
Appears when memory mode is selected.
oMEMORY CHANNEL NUMBER INDICATORS
➥ Shows the selected memory channel number. (p. 00)
➥ “C” appears when the call channel is selected. (p. 00)
!0PRIORITY WATCH INDICATOR (p. 00)
Appears while the priority watch is activated; flashes while
the watch is paused.
!1LOCK INDICATOR (p. 00)
Appears when the lock function is activated.
!2TONE INDICATORS
➥ “” appears while the subaudible tone encoder is in
use. (p. 00)
➥ “” appears while the tone
(CTCSS) squelch function is
in use. (p. 00)
➥ “D ” appears while the tone
(DTCS) squelch function is in
use. (p. 00)
➥ “” appears with the “” or “D ” indicator while the
pocket beep function
(CTCSS or DTCS) is in use. (p. 00)
!3DUPLEX INDICATORS (p. 00)
“+” appears when positive duplex, “–” appears when neg-
ative duplex operation is selected.
!4AUTO POWER-OFF INDICATOR (p. 00)
Appears while the auto power-off function is in use.
!5NARROW MODE INDICATOR (p. 00)
Appears when the narrow mode is selected.
*The narrow mode is available with some version