User Manual

6
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Microphone (HM-133V*)
qVFO/LOCK SWITCH [VFO/LOCK]
➥ Push to select VFO mode. (p. 00)
➥ Push for 1 sec. to switch the lock function ON and OFF.
(p. 00)
wPTT SWITCH
➥ Push and hold to transmit; release to receive.
➥ Switches between transmitting and receiving while the
one-touch PTT function is in use. (p. 00)
eUP/DOWN SWITCHES [Y]/[Z]
➥ Push either switch to change memory channel, call
channel, set mode contents, etc. (pgs. 00, 00)
➥ Push either switch for 1 sec. to start scanning. (p. 00)
rACTIVITY INDICATOR
➥ Lights red while any key, except [FUNC] and [DTMF-S],
is pushed, or while transmitting.
➥ Lights green while the one-touch PTT function is in use.
tKEYPAD (p. 00)
yFUNCTION INDICATOR
➥ Lights orange while [FUNC] is activated—indicates the
secondary function of switches can be accessed.
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad.
uFUNCTION SWITCH [FUNC] (p. 00)
iDTMF MEMORY SELECT SWITCH [DTMF-S] (p. 00)
oFUNCTION SWITCHES [F-1]/[F-2] (p. 00)
Assign your desired key function from the front panel
switches.
• Default settings are [LOW(DUP)] for [F-1] and [TONE(T-SCAN)]
for [F-2] ([T-SCAN] when pushed and held).
!2BANK/OPTION SWITCH [BANK/OPTION]
➥ Push to select memory bank. (p. 00)
➥ Push for 1 sec. to activate the installed optional unit.
(p. 00)
yMEMORY/CALL SWITCH [MR/CALL]
➥ Push to select memory mode. (p. 00)
➥ Push for 1 sec. to select call channel. (p. 00)
q
e
r
t
Mic element
y
u
i
o
!0
!1
w
* A different microphone
may be supplied de-
pending on version.