IMPORTANT This is: a multiplication guide for the [C-via, 1-2iE, IX-4iA" and Icicle. Functions: described in this Tech ‘Talk cannot be used until entering the MULTI-FUNCTION mode. [ To use all functions: described in this Tech Talk, the “all function type AP {Type Al is recommended: * When first entering : the . MALFUNCTION mode, the all function type Al may be selected. EASY and MULTI-FUNCTION modes SEAMY made These transceivers are designed for basic sim: plea operation,: enshrining easy: operation.
The PTT ook unction locks the: PTT. ‘s Witch electronically 1o prevent accidental transmission: When PIT:is pushed with the PTT lock: ON; 2 {ow bop tore sounds 1o indicate transmissions impossible. Cockpit OFF PIT ook ON A ebbs sounds: each tme a switch is pushed 1o confirm it This:confirmation: Beep: can: be turned: OFF for silent operation of {0 save battery power NOTE: Even it the confirmation bees s OFF, the.
f A FETE | DYE encoder and: decoder. stations in your:group. need the pager function: PAGER, CODE SQUELCH Pager:and: code: squelch: functions ‘are :selective’ calling ‘and communication systems :using:a Use these unctions f6r communications in’ your! group. Al M Pager The pager function fs a selective calling system Using: MDT codes.: With the pager; you can ‘call any: one or all the: stations ini yer group, and you. can receive.a specified cal from & station In your group.
= POWER-ON TIMER, POWER-OFF TIMER, AUTO POWER-OFF & C-functions W Power-on timer Overpowering ON presentation time: M Power-off timer Turns prows OFF at a preset time: NOTE:: The :power-on: and: power oft timers enter the *OFF" condition ‘once they are side. To activate them again you must first select the “ON” condition.
