Operation Manual
7-9
7
FUNCTIONS FOR RECEIVE
IF filter selection (Continued)
HF SSB (600Hz – ) (Default: SHARP)
Select the filter shape for the SSB mode in the HF
bands.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 600 Hz or wider.
HF SSB-D (600Hz – ) (Default: SHARP)
Select the filter shape for the SSB-D mode in the HF
bands.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 600 Hz or wider.
HF CW ( – 500Hz) (Default: SHARP)
Select the filter shape for the CW mode in the HF
bands.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 500 Hz or narrower.
HF CW (600Hz – ) (Default: SHARP)
Select the filter shape for the CW mode in the HF
bands.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 600 Hz or wider.
50M SSB (600Hz – ) (Default: SOFT)
Select the filter shape for the SSB mode in the 50 MHz
band.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 600 Hz or wider.
50M SSB-D (600Hz – ) (Default: SHARP)
Select the filter shape for the SSB data mode in the 50
MHz band.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 600 Hz or wider.
50M CW ( – 500Hz) (Default: SHARP)
Select the filter shape for the CW mode in the 50 MHz
band.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 500 Hz or narrower.
50M CW (600Hz – ) (Default: SHARP)
Select the filter shape for the CW mode in the 50 MHz
band.
Options: SHARP or SOFT
The set filter shape is automatically used only when
the IF filter is set to 600 Hz or wider.
D
Filter shape set mode
The DSP filter shape for SSB, SSB data and CW can
be independently set to soft or sharp.
q Hold down [SHAPE](F) for 1 second.
• The Filter shape set screen is displayed.
w Push [Y](F) or [Z](F) to select the desired item.
e Rotate [MAIN DIAL] to set the filter shape to soft or
sharp.
r Push [EXIT/SET].
• Exits the Filter shape set screen.
• Filter shape set screen