User Manual

21
6
MEMORY/CALL PROGRAMMING
■ Memory editing
Memory (call) channel contents can be moved to VFO or to
another memory.
D Memory/call ➾ VFO
➀ Select the memory (call) channel to be transferred:
➥ Push [
A V] ([
f
(CALL)]) to select memory (call) mode.
➥ Push [Y]/[Z] to select the memory (call) channel.
➁ Push [B M] for 1 sec. to transfer the VFO contents to the
selected memory.
• VFO mode is selected.
D Memory/call ➾ memory/call
➀ Select the memory (call) channel to be transferred:
➥ Push [
A V] ([
f
(CALL)]) to select memory (call) mode.
➥ Push [Y]/[Z] to select the memory (call) channel.
➁ Push [B M] momentarily.
•“VF” appears and flashes with “X”.
➂ Push [Y]/[Z] to select the target memory.
➃ Push [B M] for 1 sec.
• VFO mode is selected and the contents are transferred to the tar-
get memory.
D Clearing a memory
➀ Push [B M] to enter memory transfer mode.
•“X” and a memory channel number flash.
➁ Push [Y]/[Z] to select the memory channel to be cleared.
• Memory channels PA, Pb and CH1 cannot be cleared.
➂ Push [B M] momentarily, then within
1 sec. push it again for 1 sec.
• The contents of the selected
memory are cleared.
➃ Push [ ] to return to regular operation.
MR
IC-T2H_RTTE.qxd 03.6.20 18:58 Page 21 (1,1)